Comments

Post a Comment

Popular posts from this blog

7-segment LED interface

Image
Display the Hex digits 0 to F on a 7-segment LED interface Theory: DISPLAY ARE CONNECTED IN COMMON CATHODE MODE Port0 Connected to data lines of all 7 segement displays               a             ----           f|  g |b            |----|           e|    |c             ----  . dot               d             a = P0.04                                                    b = P0.05           c = P0.06           d = P0.07           e = P0.08           f = P0.09           g = P0.10           dot = P0.11                              Select lines for two 7 Segments           DIS1 P0.19           DIS2 P0.20 Program: #include <LPC17xx.h> unsigned int delay, count=0, Switchcount=0,j; unsigned int Disp[16]={0x000003f0, 0x00000060, 0x000005b0, 0x000004f0, 0x00000660,0x000006d0, 0x000007d0, 0x00000070, 0x000007f0, 0x000006f0, 0x00000770,0x000007c0,0x00000390, 0x000005e0, 0x00000790, 0x00000710 }; #define ALLDISP 
Read more
Image
Syllabus   Embedded Controller Lab B.E., VI Semester, Electronics & Communication Engineering/ Telecommunication Engineering [As per Choice Based Credit System (CBCS) scheme] Subject Code 15ECL67                                                                      IA Marks 20 Number of Lecture Hours/Week 01Hr           Tutorial (Instructions)+ 02 Hours Laboratory = 03 Exam Marks 80                                                                                    Exam Hours 03 CREDITS – 02 Laboratory Experiments PART-A: Conduct the following Study experiments to learn ALP using ARM Cortex M3 Registers using an Evaluation board and the required software tool. 1. ALP to multiply two 16 bit binary numbers. 2. ALP to find the sum of first 10 integer numbers. PART-B: Conduct the following experiments on an ARM CORTEX M3 evaluation board using evaluation version of Embedded 'C' & Keil Uvision-4 tool/compiler. 1. Display “Hello World” mes
Read more

Interface a Stepper motor

Image
Interface a Stepper motor and rotate it in clockwise and anti- clockwise direction: THEORY: A stepper motor (also referred to as step or stepping motor) is an electromechanical device achieving mechanical movements through conversion of electrical pulses. Stepping motors can be viewed as electric motors without commutators. Typically, all winding in the motor are part of the stator, and the rotor is either a permanent magnet or, in the case of variable reluctance motors, a toothed block of some magnetically soft material. All of the commutation must be handled externally by the motor controller, and typically, the motors and controllers are designed so that the motor may be held in any fixed position as well as being rotated one way or the other.  Stepper motors are driven by digital pulses rather than by a continuous applied voltage. Unlike conventional electric motors which rotate continuously, stepper motors rotate or step in fixed angular increments. A stepper motor i
Read more